NOMENCLATURE EXTANT 1980Written by Godfrey Dykes© RN Communications Branch Museum/Library |
OUTFIT | BRIEF DESCRIPTION | |
---|---|---|
1.2.3.4. | 1. HF broadband transmit aerial (Bi-conical)Tiger and Blake - 640 CAWUsually 8-24 MHz1000 Watts | |
1.2.3.4. | A main wire aerial rigged between the mainmast and foremast. Forward part of wire is part of the broadband folded monopole HF aerial. The after part of wire is the MF transmit aerial fed from the ETB Frigates and DLG's When fitted MIXED FIT the whole aerial is connected to the ETB and covers the frequency range of 240 kHz to 2.9999MHz. When fitted ICS the forward part covers the frequency range of the broadband aerial and the after part is connected to the ETB which covers 240 kHz to 3MHz. Mixed Fit with ETB - 500 Watts. With ICS (i) ETB 500 Watts (ii) Broadband carries anything up to 4000 Watts depending on number and configuration of HF transmitters fitted | |
1.2.3.4. | A kite type aerial from ETB to top of a mast Assault ships and carriers 200 to 600 kHz 500 Watts | |
1.2.3.4. | Main wire aerial rigged between the mainmast and foremast or mainmast/foremast to funnel. Similar to AHR but bigger physical dimensions Some ICS frigates, certain DLG's LPD and Carriers Different configurations but same principles involved as AHR HF aerials. Carriers can use up to 8000 Watts on broadband | |
1.2.3.4.5. | A broadband TX/RX aerial. The figures after the letters desig e.g. AJE(5)...denotes the type and impedance of cable used for aerial feed Most standard fits 225 to 400 MHz Up to approx 140 Watts with type 693 UK/SRA 102 | |
1. | UHF aerial assembly comprising wrap around omni-directional aerials. One for TX and one for RX housed in one cover | |
1. | VHF broadband TX/RX dipole | |
1.2.3.4. | An encapsulated vertically polarised dipole covering the band 100 - 200MHz VHF band of 1203(4) V/UHF Transceiver VHF portable Stornophone equipment for mine hunting vessels FM reception for SRE in MCMV's only | |
1.2.3. | A UHF aerial assembly incorporating 2 coaxially mounted antennae (1 for TX and 1 for RX) housed in a GRP radome. The assembly is fitted with a flange for mast head mounting This outfit is based on the Airtech 246-2 aerial Batch 1 and Batch 3 Leanders | |
1.2.3.4. | Airborne/Shipborne UHF equipment - (DLG's mainly as a 'bonus' equipment) 225 - 399.9 MHz. 1750 Channels with 100 kHz spacing Manual or 18 pre-set channels with a Guard (243MHz) facility 16 Watts | |
1. | Fitted in submarines to convert high speed Morse code broadcast signals to RATT broadcast signals | |
1.2. | A UHF half wave dipole Similar to UK/SRA 102 for MCMV's | |
1.2. | SCOT (Small COmmunications Terminal) dish aerial - 3.5 foot for SCOT 1 and 6 foot for SCOT 2 Fitted on an angle either side of the foremast on SCOT ships | |
1. | An Active (energised) HF/MF receiving aerial with amplifier | |
1. | ICS3 HF broadband transmitting aerial | |
1. | ICS3 MF cage transmitting aerial connected to ETB | |
1.2.3.4.5. | A whip aerial normally associated with transmission. Mounted on top of a base tuner Most standard fits 1.5-24 MHz 1000 Watts AWW1 | |
1. | (M) means modification. As above but lightweight rods. | |
1.2.3.4.5. | A whip aerial - (M) meaning stronger connections - designed for a low power HF transmission system and/or HF MF and LF reception Fitted widely in small ships and in Mixed Fits for 618/619 TX/RX working. Stowed in MCO/CCR ready for fitting in some ICS1 ships Transmission 1.5 to 16 MHz : Reception HF, MF and LF bands. Up to 40 Watts AWY1 | |
1.2.3. | A whip aerial normally associated with transmission but fitted on the hangar roof of Leander class frigates for reception purposes. Can be lowered outboard if required. Helo Fleet Memos and BR766. Mainly ICS1 frigates As for AWN | |
1.2.3.4.5. | A whip aerial normally associated with reception but also fitted as the TX/RX aerial for the 641/643 Most standard fits Depends on the Group transformer (Deck Insulator - DI) OA or OC fitted, but covers frequencies in the LF, MF and HF bands Up to 100 Watts with the 641/643 AWW1 | |
1.2. | HF transmit whip with a modified ETC which affords remote tuning of up to 10 pre-set frequencies between 2 and 30 MHz ICS3 ships | |
1.2.3.4. | Replaces AWF(M) and AWN whip aerials. To be used as HF TX/RX whip aerials. 30 foot long. 1973 onwards for new constructions and at long refits HF for TX/RX. V/L/MF for RX with Group OA DI fitted 1000 Watts. Sealed to prevent icing/earthing situations | |
1.2.3.4. | Replaces AWH(M) whip aerial. To be used as HF TX/RX whip aerial. 24 foot long As for AWW1 As for AWW1 100 Watts | |
1.2.3.4. | A variant of AWY1 but for reception only. 16 foot long. As for AWW1 1.5 - 30 MHz Fitted only where space for AWY1 (height limitation) cannot be found | |
1. |
Broadcast selector unit - used in RWA broadcast side |
|
1. |
Basic Radio Channel Selection |
|
1.2.3.4. |
LF, MF and HF receiver
Fitted in small ships and S/M's as main or secondary receiver. On frigates and above primarily as an emergency receiver.
59 - 555 kHz and 1.47 - 30 MHz
CJP1 and 641 RX |
|
1.2.3.4. |
LF, MF and HF receiver
As for CAS above
60 kHz to 32 MHz
As for CAS above |
|
1.2.3.4.5. |
MF HF receiver (B40 with CAW EAL, EAO or EZ)
Fitted in most ships to cover the frequency gap between CJA and CJD i.e., 650 kHz to 2 MHz
650 kHz to 30 MHz
Fitted also in earlier ICS2 ships as GP Bay with FTA/FAZ
Being replaced by CJM in some ships on GP Bay and by the CJP(2) with FTA1 in others |
|
1.2.3.4. |
VLF LF receiver (B41 with CAW EAL, EAO or EZ)
As for CAY above
As for CAY above
As for CAY above |
|
1. |
Control Circuit Exchange - uppers equipment, and lowers users. |
|
1.2. |
SCOT accessing equipment. Fitted in SCOT KRB. Replaces FDM
Fitted on latest SCOT ships and shore bases. Each ship has own code and utilises whole of 2MHz band. Shore bases have ships unique code. No need for a CAB. |
|
1.2.3. |
HF synthesised receiver
Fitted in ICS1 and ICS1 Mixed Fit ships
2 to 30 MHz |
|
1.2.3. |
HF free running version of the CJA above
Fitted in ship-shore bay in ICS1 and ICS1 Mixed Fit ships
2 to 30 MHz |
|
1.2.3.4. |
VLF LF synthesised receiver
Fitted in most modern ships - S/M's, frigates and above
10 - 200 kHz
Being replaced by the FTA in direct association with the CJA/CJM. Fitted into early ships because at the time, FTA was pending! |
|
1.2.3.
| HF synthesised receiver
Older ships
1 to 30 MHz |
|
1.
| An RA117 - used in EWO to replace EWO CAY/CAZ |
|
1.2.3.
| LF MF and HF synthesised receiver
Fitted in ICS2 and ICS2 Mixed Fit ships
240 - 525 kHz and 1 - 28 MHz |
|
1.2.3.4.
| MF HF synthesised receiver, or partly synthesised with a VFO
Fitted as main receiver in small vessels (1) - emergency receiver (2) in larger vessels. Replaces CAS/CAT
7 kHz to 30 MHz with FTA : 15 kHz to 30 MHz without FTA
A CJP3 is a CJP1 but modified for low magnetic signature for use in MCMV's |
|
1.2.
| MF HF synthesised or partly synthesised receiver with VFO. Fitted with CAW.
Replaces CAY/CAZ when fitted with FTA1. |
|
1.2.3.
| VHF channelised to six channels (Pye Cambridge)
Fitted in MCMV's. Semi portable. The set cannot be remoted via RN remote systems, and also the makers will not allow a microphone lead of more than 12 feet in length to be used. To get over this limitation, some ships have fitted an aerial change over switch on the bridge and move the set from bridge to W/T office as necessary
10 Watts high power. Less than 1 Watt on low power |
|
1.2.
| Control and Monitoring Desk
Fitted in ICS ships |
|
1.2.
| Signal Generators
Fitted in Mixed Fit ships for EZ filter tuning |
|
1.2.3.4.
| UHF receiver associated with the 691 transmitter
Fitted widely in small ships and on many frigates and above
277 - 283 MHz
To be replaced by the 1203 |
|
1.2.3.4.
| UHF receiver associated with the 692 and 693 transmitters
Fitted widely on virtually all ships above CMS
225 - 399.9 MHz
As for CUH above |
|
1.
| Control Unit Radio Remote - normally called an RCU |
|
1.
| Control Unit Radio Relaying - normally called an RRU |
|
1.2.
| Direct Current amplifier
Fitted to specially wired CUJ's to enable Auto UHF to UHF/HF relaying. Part of KMM or KMP |
|
1.
| Distribution Panel (Broadcast). Fitted with RWA. |
|
1.
| Distribution Panel (Tactical). Fitted with RWA |
|
1.
| Distribution Panel Teleprinter (Broadcast). Fitted with RWA |
|
1.
| Distribution Panel Teleprinter (Tactical). Fitted with RWA |
|
1.
| Distribution Panel Teleprinter (Remote). Fitted with RWA |
|
1.
| Distribution Panel (Circuit). Fitted with KKA |
|
1.
| Distribution Panel (Voice). Fitted with KKA |
|
1.2.
| 2, 4 or 6 Auto tuned resonators respectively. UHF CAW
Fitted depending upon UHF equipment carried |
|
1.
| Hand tuned resonator outfit for Type 691/CUH CAW |
|
1.2.
| HF common aerial working system
Blake and Tiger use this system with 640 transmitters into a AGG |
|
1.2.
| 2, 4 or 6 Hand tuned resonators respectively. UHF CAW.
Fitted depending upon UHF equipment carried |
|
1.2.
| Supplies 2 HF and 2 MF lines to CAY and CAZ respectively
Fitted with EZ in ICS1 Mixed Fit ships |
|
1.2.
| Supplies 2 HF and 1 MF line to CAY and CAZ respectively
Fitted with EZ in ICS1 ships without FTA(2) |
|
1.2.
| Supplies 2 HF and 2 MF lines to CAY and CAZ respectively
Fitted on small ships or ships without EZ but having EAL3 |
|
1.2.
| Supplies 3 aerial lines to CJM receiver
Fitted in small ICS2 Mixed Fitr ships and in RFA's |
|
1.2.3.
| From one aerial input, provides up to 40 outputs for private receivers.
Most modern ships in cabin flat and other officers cabins
3 ranges 150-350kHz: 500-1500kHz and 6-28 MHz |
|
1.2.3.4.
| ICS transmitter common aerial working filters with dummy load cabinet. The figure suffix denotes the size and configuration of filters
ICS ships
EAW range1 is 2-6 MHz: range 2 is 3-11.5 MHz and range 3 is 8-24 MHz
Up to 1000 Watts through each filter |
|
1.2.3.
| A single UHF multicoupler drawer assembly incorporating a resonant filter provided with tuning facilities
ICS3 ships
For use with YBU1 and YBU3 |
|
1.2.3.
| Similar to EBA1 but manually tuned
ICS3 ships
For use with YBU1 to YBU4 inclusive |
|
1.2.3.4.5.
| HF Base Tuner
Fitted in ICS1, some older ships and submarines
1.5 - 24 MHz
Up to 1000 Watts
Being replaced by the ETE Base Tuner |
|
1.2.3.4.
| MF Base Tuner
ICS 1, ICS 1 Mixed Fit ships, ICS 2 and ICS 3 ships
240 kHz to 3 MHz
500 Watts |
|
1.2.3.4.5.
| HF Base Tuner
ICS 1 Mixed Fit
1.5 - 24 MHz
1000 Watts |
ETF
|
1.2.3.4.
| HF Base Tuner
Fitted in some ships for 618H and 619H transmitters
1.5 - 16MHz
100 Watts |
|
1.2.
| HF Base Tuner
ICS1 and ICS2. Replaces ETA |
|
1.2.
| HF Base Tuner
ICS1, ICS2 Mixed Fit and ICS3. Replaces ETC. |
|
1.2.3.4.5.
| HF Base Tuner. Automatic
ICS1,2 and 3
1.5 to 24MHz
1000 Watts
Replaces ETA and ETF if auto tuning is required |
|
1.2.3.4..
| Receiver aerial exchange and filter band suppression
Fitted in older type ships
Filters 1.5-6 MHz and 6, 8, 12, 16 MHz ship-shore band
Called EAO4 when fitted into small ICS2 ships and RFA's |
|
1.2.
| ICS transmitter aerial exchange
ICS ships. The figure suffix denotes the number and configuration of transmitters/aerials
| |
1.2.3.
| ICS receiver aerial exchange
Fitted in all modern ships - frigates and above to route receiving aerials to 3 separate lines for each receiver, and for the inclusion of filter band suppression to stop own ship transmitters from causing harmful interference to own receivers when TX and RX are on different frequencies
Filters 2-5MHz, 5-10MHz and 10 to 16MHz
| |
1.2.
| Adaptor for CAY/CAZ. Gives the receivers an SSB Voice capability and provides flexible stability for F1 reception etc
Fitted widely with the CAY/CAZ
| |
1.
| A broadband transmission filter fitted in ICS3 cruiser CAH
| |
1.
| As above, but in frigates and destroyers
| |
1.
| As above, but in HMS Grenville and Training Establishments
| |
1.2.3.
| HF/DF equipment
ICS ships. No longer EW commitment but now a 'G' department task
2 - 30 MHz
| |
1.2.3.4.5.6.7.8.9.
| COMIST (Communications in the Short Term) 640 - CJK - KH
ICS1 (Integrated Communications System) TDA - CJA - KMM
ICS1 Mixed Fit 640 - CJA - KMP
ICS1 Mod 1 TDA2 - CJA - Modified KMM
ICS2 TDC - CJM - KMM
ICS3 ALFA - Big ship fit
ICS3 BRAVO - Frigate and Destroyer fit
ICS3 CHARLIE - Small ship fit
ICS3.5 - HMS Collingwood training fit
| |
1.2.3.4.
| MF Manual D/F receiver and set
Fitted in MCO on many ships
42 kHz to 1060 kHz
Being replaced by FM16
| |
1.2.3.
| Auto/Manual MF D/F receiver and set
Fitted in MCO of many ships although in a very few cases, it was fitted on the bridge/chartroom. On Type 21 frigates it was fitted in the EWO
250 - 550 kHz
| |
1.2.3.
| Frequency standard
ICS1
Supplied 100kHz to CJA/TDA: 1MHz to 641: 5MHz to FTA and 100 kHz to CMD
| |
1.2.
| Frequency standard
Fitted in submarines (SSBN's)
| |
1.2.3.
| Frequency standard
ICS1 Mixed Fit
Supplied 100kHz to CJA: 1MHz to 640 and 641: 5MHz to FTA2
| |
1.2.
| Frequency standard
Fitted in submarines (SSBN's)
| |
1.2.3.
| Frequency standard
ICS2 Frigates
Supplied 1MHz to TDC, CJM ,641 and SCOT: 5 MHz for FTA1 and LINK 10 (DATA LINK)
| |
1.2.3.
| Frequency standard
ICS2 large ships
As above but not 641 (if fitted)
| |
1.2.3.
| Frequency standard
Fitted in small craft having a 642 with a CJM and FTA
Supplied 1MHz 641 (or 642) CJM and 5MHz to the FTA
| |
1.2.3.
| Frequency standard
Older ships
Supplied 1MHz to 640: 100 kHz to CJK or CJA
| |
1.
| 2 Frequency standards - 1 distribution panel - 1 up-converter and 1 multicoupler
| |
1.
| Same as above but with no multicoupler
| |
1.2.3.
| Frequency up-converter
Fitted with CJM - externally and with Normal/Emergency power supply arrangements
7kHz to 2.2 MHz into aerial line 3
| |
1.2.3.
| Frequency up-converter
Fitted with CJA - internally into the CJA(1) cabinet. Power supply from CJA cabinet
7kHz to 2.2MHz into aerial line 3
| |
1.2.
| Frequency up-converter
Fitted in submarines (SSBN's)
| |
1.
| Similar to FTA(1) but modified to achieve low magnetic signature for use in MCMV's
| |
1.2.3.4.5.
| UHF/DF equipment
Fitted in carrier and ships controlling aircraft (not compulsory)
225 - 400 MHz
A two channel shipborne equipment together with polemast aerial
Replaces FU1
| |
1.
| Socket sited alongside CCX Upper in MCO for Secure Net Alongside Communications
| |
1.2.3.
| Used to combine the outputs of three ICS drive units into one output without intermodulations, suitable for driving one WBA
Fitted in ICS ships wired for Triple and/or Double Drive
Has an attenuation effect depending on frequency, but as a general rule 110 Watts per drive when the Hybrid is connected for triple
| |
1.2.3.
| Covered voice system - 1 BID 150 with 3 users
Fitting - FF and above. NORMAL ships fit except LPH/LPD
Used with UHF 692/CUJ or in certain RFA's 691/CUH
| |
1.2.
| Covered voice system - 2 BID 150's fitted separately with 6 users
Fitted as NORMAL fit for LPD's and LPH's in Ops Room. Used with 692/CUJ
| |
1.2.
| Covered voice system - 2 BID 150's fitted in standard cabinet with 6 users
Not usually fitted at sea
| |
1.2.
| Covered voice system - 1 BID 150. Similar to KKA1 but modified to achieve a low magnetic signature
Fitted in MCMV's
| |
1.
| Covered voice system - Enables KY8 to be used in lieu of BID 150
| |
1.2.3.
| Covered voice system - KKB is normally suffixed with a figure denoting similar systems to those of the KKA series.
Fitted in LPD/LPH Assault Ops Rooms
Uses Army VHF Equipment C42
| |
1.2.
| Control system with a CMD
Fitted in ICS1 and ICS2 ships
| |
1.2.
| Control system without a CMD
Fitted in ICS1 and ICS2 Mixed Fit ships
| |
1.
| Provides facilities for monitoring and remote control of communications equipment in MCMV's
| |
1.
| Distribution and Supervisory equipment in ICS3 Cruiser CAH
| |
1.
| As above but in frigates and destroyers
| |
1.
| As above but in HMS Grenville and Training Establishments
| |
1.
| As above but in ICS3 RFA's
| |
1.
| As above but in ICS2A Batch 3 Leanders
| |
1.
| See UK.SSC-002
| |
1.2.3.
| Contains a CJA, TDA and Test/Switch unit. Primary operators use is for EZ filter tuning
ICS1
As for normal CJA/TDA
| |
1.2.3.
| Contains a CJM and a TDC with Test/Switch unit. Primary operators use is for EZ filter tuning
Fitted in early ICS2 ships
As for normal CJM/TDC
| |
1.2.3.
| Used normally with wire RX aerials. Uses a transformer which gives an output of 15 kHz to 1.5 MHz and the pick-up of the LF/MF wire aerial is increased by a factor of 10 by connecting the transformer into the aerial line
Fitted in older type ships with EAL and in modern ships with EZ4 for FTA LF input line
15 kHz to 1500 kHz
| |
1.2.
| An emergency diesel generator
Fitted in most ships - frigates and above excluding DLG's, for limited supplies should all switchboards fail to supply primary power
| |
1.2.
| Parallel Keying Unit. Can key up to a maximum of 5 transmitters simultaneously for MRL's TF/TG Broadcasts etc
Fitted in most standard fits
| |
1.
| Panel Signal Distribution Radio - Designed to replace the Monitor Cabinet in the later ICS ships. It allows any operational TDC to be used to tune the EZ suppression filters
| |
1.2.3.
| FM hand portable operating in the IMM band. The 001 is operated by speaking/listening direct into the MIC/Loudspeaker. The 002 is identical but is operated from extended microphone/Loudspeaker facility. The standard short range portable (SSRP) of the Fleet. Virtually all ships and craft
Channel 1: IMM Channel 8 (156.4MHz) in all cases. Channel 2: IMM Channel 13 (156.65MHz) in all cases except that in sets supplied to Minehunters/Minesweepers and MCM Support Vessels this channel will be crystallised for operating on 156.525MHz (IMM Channel 70). This frequency is intended as a separate common channel for 'sweeping' ops. Channel 3: IMM Channel 16 (156.8MHz) on Submarines, Minehunters, Minesweepers, MCM Support Vessels. Frigates and above have channel 3 as a private channel of their own. It is import to understand that many ships share their private channel with other ships and therefore must use callsigns when in company with one another. Also that half the Navy share this channel with commercial users (1 to 28 series). The other half share channel three with commercial users of IMM Channels 60 to 88. Golden rule: consult ALRS VOL 6 and STORNO DCI before using channel 3.
| |
1.2.3.
| As for PRC 001/002 but these sets are INTRINSICALLY SAFE (IS). This means that the sets may be operated in the immediate vicinity of explosive gases.
Fitted in a great number of RFA's
Channel 1: IMM Channel 8 - Channel 2: IMM Channel 13 - Channel 3: All private channels but with sharing as in 001/002 above.
| |
1.2.3.4.
| Airborne UHF
225 - 399.9 MHz
12 crystal controlled channels
2 Watts
| |
1.2.3.4.
| Shipborne UHF
225-399.9 MHz. 1750 Channels with 100 kHz spacing
19 pre-set Channels. Manual facility.
16 Watts
| |
1.2.3.4.
| Airborne UHF
225-399.9 MHz. 3500 Channels with 50kHz spacing
Manual or 18 pre-set Channels with Guard (243MHz) facility
16 Watts
| |
1.2.3.4.
| Airborne VHF/UHF
117.5 - 135.95MHz and 225-399.9MHz. Channels 370 on VHF and 3500 on UHF with 50 kHz channels spacing
Manual or 18 pre-set channels with Guard (121.5 MHz VHF and 243MHz UHF) facilities
16 Watts
| |
1.2.3.4..
| Airborne VHF/UHF
117.5-135.9MHz and 225-399.9MHz. Channels and spacing same as above for PTR 174D
Channels pre-set and Guard facilities as above for PTR 174D
VHF 3.5 Watts AND UHF 16 Watts
| |
1.2.3.4..
| Airborne VHF/UHF (DATA)
117.5 - 135.05 MHz and 225-399.9MHz. Channels 370 VHF. 3500 ON UHF Voice (50kHz spacing) but reduced on UHF for FSK (DATA) working when spacing is increased to 100 kHz.
Manual or 18 pre-set Channels but NO GUARD facilities.
VHF 3.5 Watts and UHF 16 Watts
| |
1.2.
| Airborne VHF/UHF
Same as PTR 175
| |
1.2.3.4..
| Airborne VHF/UHF (DATA)
100-156 MHz and 225-399.9MHz. Channel spacing 100kHz for DATA, 25 OR 50kHz for Speech. 9240 Channel available.
Manual or 19 pre-set Channels with Guard facilities on both V and UHF
VHF 10 Watts, UHF 20 Watts
| |
1.2.
| Quadrantal Error Box. Proper name is "Aerial AUX Box".
Fitted in ships having both the FM16 and the SQA fitted
| |
1.
| LORAN
| |
1.2.
| Remote Channel Selection. Provides plugging facilities from specified 692/CUJ to specified user position fitted with an RCS selector e.g. Helo Controller.
Fitted widely. Associated with 692/CUJ - must have a Design 90 fitted and must be connected to UHF CAW EAG/H/J
| |
1.2.
| Radar Interference Suppressor. Associated with the CUJ.
Fitted on ships having a Type 965 Radar System
| |
1.2.
| Radar Interference Suppressor for VHF
Fitted with the new V/UHF equipment i.e. 1203 in ships with Type 965 Radar Systems
| |
1.2.
| Receiver Output Exchange. Has an Upper to which all receiver outputs are fed, and a Lower to which all user equipments are fed. Thus, the output of any V/L/M/HF receiver can be 'married' to a transmitter, BSU's, RX Lines etc.
Most standard fits
| |
1.2.
| Normally sited in the Ops Room. CCX Lower plugs terminate in the RLR and by plug in relays routed to Ops Room in a pre determined sequence. Ops Room selection by VCS 200 series
Fitted in frigates and above
| |
1.2.
| Tactical and Broadcast RATT outfits
Fitted virtually in all ships
| |
1.2.
| Tactical and Broadcast RATT outfits with a security box (BID 580 or BID 660)
Used for training purposes but some New Commonwealth Navies are fitted
| |
1.2.
| Tactical and Broadcast RATT outfits
Fitted in Polaris Submarines
| |
1.
| RATT and message processing equipment for ICS3 Cruiser CAH
| |
1.
| As above but for ICS3 frigates and destroyers
| |
1.
| As above but for ICS3 in HMS Grenville and Shore Training Establishments
| |
1.
| As above but ICS3 in RFA'S
| |
1.
| RATT equipment for MCMV's excluding crypto terminal equipment
| |
1.2.3.
| Selective Calling and Responding outfit. Provides coded selective calling and responding facilities between stations on either a line or radio path. The outfit employs a four digit code to provide 1000 addressees. Each station using the outfit is also capable of making a simultaneous non-selective call to all other stations on the network.
Fitted in non-continuous-watch small craft and in larger ships.
Facilities are built into the ICS2 CMD for a dial system to be used for the SPA
| |
1.2.3.
| An automatic alarm receiver fixed tuned on a centre frequency of 500 kHz. Normally associated with the FM16 but is fitted with the FM12 in certain ships
Fitted widely
496-504 kHz
| |
1.2.
| Selector Radio Channel. Normally fitted within a VCS (Versatile Console unit) (VCS200). Gives an Ops Room user selection of normally 10 CCX lower lines via the RLR
Fitted in ICS2 and some ICS1 Modified ships
| |
1.2.
| Switch Unit Radio. The TX Control in RWA Tactical
Ships having RWA/B/C
| |
1.
| A radio telephone bay providing facilities for the connection of a HF and/or UHF radio link to a shore telephone system. Provides ships with access to MOD and Post Office (via MOD) telephone networks
| |
1.2.3.
| Transmitter Control Unit. Routes the AF from user to TX
Fitted in ICS1 MOD 1 and ICS2 ships. One TCU per ISB channel.
Fitted in ICS1 ships. Two TCU's per ISB channel
| |
1.2.3.4..
| Transmitter drive unit. Delivers the required RF plus/minus the required modulation at low level (mW) to a wideband amplifier
Fitted in ICS1 and ICS1 MOD 1 ships
240 kHz to 23.9999 MHz
50mW above 2MHz - 25mW below 2MHz
| |
1.2.3.
| MF/HF Transmitter drive outfit for ICS1 & ICS1 MOD 1 ships.
Performs the same function and utilises the same pattern cabinet as outfit TDA1 but employs solid state circuitry instead of thermionic.
Introduced as a direct replacement for outfit TDA1.
| |
1.2.3.4..
| Transmitter drive unit. Delivers the required RF plus/minus the required modulation at low level (mW) into a wideband amplifier.
Fitted in ICS2 ships
Depends on amplifier fitted but generally 240 kHz to 24 MHz
100 mW
| |
1.2.
| HF/MF drive assembly embodying 5 identical USB drive units and an associated drive combiner unit. Provides 3 outputs.
ICS 3 ships
| |
1.
| Similar to TDD1 but with combiner unit providing 4 outputs
| |
1.
| HF/MF drive assembly embodying 4 identical USB drive units and an associated drive combiner providing 3 outputs
| |
1.
| HF/MF drive assembly embodying 2 identical USB drive units and 1 LSB drive unit together with an associated drive combiner providing 2 outputs
| |
1.
| HF/MF drive unit assembly embodying 3 identical USB drive units and an associated drive combiner providing 3 outputs
| |
1.2.
| HF/MF drive assembly embodying 3 identical USB drive units and an associated drive combiner providing 2 outputs
For use with the WBD outfit series
| |
1.
| HF/MF drive assembly embodying 3 identical USB drive units. It provides 2 outputs with tuning initiation control for 2 aerial tuning outfits ETG(1) and 1 output for aerial tuning outfit ETB
| |
1.2.3.4.5.
| TG followed by a letter (TGA for e.g.) indicates the various types of teleprinters used in the Fleet.
TGJ - Broadcast bay semi-electronic teleprinter
TGK1 - ICS 3 high speed electronic teleprinter dot matrix printing head. TX and RX using high AF tone signalling
TGK2 - ICS3 receive only version of TGK1. Can also use D.C.
TGK3 - ICS3 similar to TGK1 but uses a 1kHz tone
| |
1.
| Ancillary equipment for use with BID660 to enable operation with ship alongside covered line working
| |
1.2.3.
| Literaliser equipment. Processes encrypted output of BID 660
Fitted in ships with BID660 in MCO's, SCYO's and Shore Commcens
May be used as normal autohead and is replacing Type 6S6 in some bays
| |
1.
| Similar to TLA1 but with low magnetic signature for use in MCMV's
| |
1.2.
| Terminal Telegraph Voice Frequency (Tactical)
Used in RATT outfits for TX/RX of RATT signals
| |
1.2.
| Terminal Telegraph Voice Frequency (Broadcast)
Used in RATT outfits for the receipt of RATT Broadcasts
| |
1.2.
| Terminal Teleprinter - is fitted on RATT Tactical bays to convert DC pulses to Tone on/off and vice-versa
Fitted widely on ships with RATT systems
| |
1.2.
| Terminal Teleprinter - is fitted on RATT Broadcast bays to convert Tone on/off into DC pulses
Fitted widely on ships with RATT systems
| |
1.
| Fitted to convert Tone on/off into DC pulses on ships having a SATCOM terminal SCOT/SKYNET 5
| |
1.
| Fitted in submarines in the AN/UGA system converting high speed Morse to RATT signals.
| |
1.
| Fitted to convert one level of DC pulses to another level of DC pulses in ships engineering cabin for SATCOM
| |
1.
| Two fitted together form the TTVF(B). Converts Tones to 1kHz on/off mostly for the reception of RATT Broadcasts.
| |
1.2.
| Designed to train Ops Room users on voice technique. Special plugs plug into the CCX Upper and the CCX Lower use plugs into the back of a special plug. The associated UHF RX is isolated from the CCX Upper, thereby allowing the MIC lines of the special plug to be directly connected to the RX Lines of the special plug
Fitted as required or requested
| |
1.2.3.4..
| An aerial developed for reception and fed into the EZ system.
Used when there is little or no room to fit the desired AWN aerial.
Fitted on IKARA Leanders and certain other new fits. Top loaded monopole
Height 7' 8.5" - total diameter 4' 6"
| |
1.2.3.
| Designed to replace the AJE for UHF TX/RX operations
Fitted widely, the first ships to get it were the Type 42's
Looks exactly like an AJE
| |
1.
| SKYNET 5 ship station
| |
1.
| SCOT ship station. Covers all units within the system
| |
1.
| Shipborne satellite communications terminal with speech capability (SCOT 2)
| |
1.
| 12 channel TDME equipment for SCOT
| |
1.
| SKYNET 5 Line Modem equipment
| |
1.
| SKYNET 5 SSME
| |
1.
| SKYNET 5 Speech plus 3 telegraph channels FDME (Frequency Division)
| |
1.
| SKYNET 5 3 Telegraph channels TDME (Time Division)
| |
1.
| SKYNET 5 - 1 Megabit/Sec phase shift modulation/code division multiple access (CDMA) equipment
| |
1.
| SKYNET 5 - 10 Megabit/Sec phase shift modulation/code division multiple access (CDMA) equipment
| |
1.2.3.4.
| Wideband amplifier
Fitted in ICS1 and some ICS2 ships
1.5 to 24MHz
Up to 1000W
| |
1.2.3.4.
| Wideband amplifier
Fitted in ICS1 and ICS2 ships
240kHz to 24MHz
500W with ETB. 1000W with EAW/ETA if above 2MHz when using TDA - if below 2MHz then 500W
| |
1.2.3.4.
| Wideband amplifier
Fitted in Submarines (SSBN's) and some ICS2 ships
2 to 28MHz. Has limited MF capability.
Up to 1000W (Normal MODE 1)
| |
1.2.3.4.
| Wideband amplifier
Fitted in ICS3 ships
240 kHz to 28 MHz
1000W from 500 kHz to 28 MHz - reduced power down to 240 kHz
| |
1.2.
| Wideband amplifier
Comprises of 2 identical 1kW HF/MF amps and an associated heat-exchange assembly
| |
1.2.
| Wideband amplifier
Similar to WBD1 but incorporating only 1 amp assembly
| |
1.
| A 1 line cabinet outfit for use with transceivers Types 1203(1) to 1203(8) inclusive
| |
1.2.
| A 2 line cabinet for the 1203 series
Restrictions are such that only 1 of the 2 equipments housed in this cabinet may be of the V/UHF variety i.e., 1203(1) to 1203(4) inclusive
| |
1.2.
| A 3 line cabinet for the 1203 series
Restrictions are such that only 1 of 3 equipments housed in this cabinet may be of the V/UHF variety i.e., 1203(1) to 1203(4) inclusive
| |
1.
| A 2 line cabinet outfit similar to YBC2 but adapted for use in MCMV's with transceiver Type 1203(9)
| |
1.2.3.4.5.6.
| ICS3 ancillary items
YBK1 - This outfit incorporates ancillary items required for ICS3 in Cruiser CAH. The major items involved are : power unit for the aerial base tuner - aerial base tuner changeover unit - 100W HF/MF amplifier - transmitter dummy load with switching - input hybrid unit - output hybrid unit - man aloft facilities for transmitting aerials.
YBK2 - Similar to YBK1 but modified for use in Types 22 and 42
YBK3 - Similar to YBK1 but modified for use in the trials ship and shore training establishments
YBK4 - Not allocated
YBK5 - This outfit incorporates ancillary items required for ICS2A. The major items involved are the same as those mentioned above for YBK1
| |
1.
| To provide accessory speech equipment for use with UK/SSC003 (SCOT 2) excluding associated crypto equipment
| |
1.2.
| A pair of 6-drawer cabinets each fitted with the power unit required to energise automatically tuned multicoupler drawers EBA1
Will house up to 12 multicoupler drawers. These may be any combination of outfits EBA1 and EBA2
| |
1.2.
| Similar to YBU1 but not fitted with power drawer units
For use with outfit EBA2 only. Will house up to 12 drawers
| |
1.2.
| A pair of 3-drawer cabinets each fitted with the power unit required to energise automatically tuned multicoupler drawers (EBA1)
Will house up to 6 multicoupler drawers. These may be any combination of outfits EBA 1 and EBA2
| |
1.2.
| Similar to YBU3 but not fitted with power units
For use with outfit EBA2 only. Will house up to 6 drawers
| |
1.2.3.4.
| A UHF man portable having 6 preset channels
Widely allocated throughout the Fleet
240 to 300 MHz
2 Watts
| |
1.2.3.4.
| A HF portable transceiver
Widely fitted in the Fleet
2 to 8 MHz
635(1) up to 3 Watts : 635(2) up to 30 Watts
| |
1.2.3.4.5.
| MF/HF Lifeboat transceiver
Carried on virtually all ships. Replaced the 629
Transmits on 500, 2182 and 8364 kHz and receives on 500, 2182 and 8200-8800 kHz
Varies with modulation/emission - up to 3.5 Watt output
No longer manufactured - being replaced by 1251 (1)
| |
1.2.3.4.5.
| HF low power transmitter
Widely fitted
1.5 to 16 MHz
40 Watts
Not many remaining - replaced by 641 or 643/CJP
| |
1.2.3.4.
| MF low power transmitter
As above for 618H
330 - 550 kHz
15 Watts
| |
1.2.3.4.5.
| HF low power transmitter
Fitted widely in MCMV's and in other ships too
1.5 to 16MHz
40 Watts
Not many remaining - replaced by 643/CJP
| |
1.2.3.4.
| MF/HF medium power synthesised transmitter
ICS1 Mixed Fit (ICS2 Mixed Fit although rare!) and older ships
240 kHz to 24MHz
Up to 500 Watts
| |
1.2.3.4.
| HF low power synthesised transmitter (TDC) and MF/HF synthesised receiver (CJM)
Some frigates and above to replace 618/CAS as emergency TX/RX
TX 1.5 TO 24mhZ : rx 240 to 525 kHz and 1 to 28 MHz
100 Watts
| |
1.2.3.4..
| HF low power synthesised transmitter
Fitted in small ships to replace 618/619 as the main transmitter - frigate and above in lieu of 618/619 as emergency transmitter
1.5 to 24 MHz
100 Watts
| |
1.2.3.4.5.
| A VHF IMM transceiver. 28 preset channels with 25 kHz spacing.
Widely fitted in the Fleet. Not normally on MCMV's and not in submarines.
156 - 162 MHz
Low power 200mW. High power up to 12Watts
Being replaced by 1202
| |
1.2.3.4.5.
| A low power UHF transmitter. 10 preset channels if used on NORMAL. 9 preset channels when used on ALTERNATIVE.
Fitted widely in frigates and above
277 to 283 MHz
10 Watts
Being replaced by Type 1203 transceiver
| |
1.2.3.4.5.
| A low power UHF transmitter. Has 1750 frequencies available but only 10 channels can be pre-programmed
Widely fitted in the Fleet
225 to 399.9 MHz
10 Watts
As for 691
| |
1.2.3.4.5.
| Same as 692 but with an added amplifier
Very few fitted. Normally found in aircraft carriers of air direction ships
Same as 692
Up to 150 Watts
As for 691
| |
1.2.3.4..
| A low power UHF transceiver
Fitted widely in submarines and MCMV's and also in one or two ships
225 to 399.9 MHz
Up to 14 Watts
| |
1.2.
| An autohead used for RATT transmissions
Widely fitted in ships having RWA/B/C
| |
1.2.
| A VHF FM transceiver for simplex and duplex operation within the frequency band 156 to 163 MHz
Replaces Type 689
| |
1.
| Same as 1202(1) but fitted in MCMV's
| |
1.2.
| A V/UHF transceiver incorporating a 20 Watt UHF and 10 Watt VHF band - 225 to 400 MHz and 156 to 163 MHz
For use in CAW role and providing remote channel selection (RCS) facilities
| |
1.
| Similar to 1203(1) but no RCS
| |
1.2.
| Similar to 1203(1) but for use in non-CAW role
Used in conjunction with cabinets YBC1,2 or 3
| |
1.
| Similar to 1203(2) but for use in non-CAW role
| |
1.
| A UHF only version of 1203(1)
| |
1.
| A UHF only version of 1203(2)
| |
1.
| A UHF only version of 1203(3)
| |
1.
| A UHF only version of 1203(4)
| |
1.
| Similar to 1203(8) but adapted for MCMV's
| |
1.2.
| An HF 100 W emergency TX/RX
ICS3 ships
| |
1.2.
| Similar to 1250(1) but fitted with alternative interface unit to provide remote control
ICS3 ships
| |
1.2.3.
| MF/HF TX/RX Distress equipment
Fitted widely
Replaces Type 638
| |
| The Army denote their equipments by using 3 letters and 2 figures, viz, SR A13. The 'SR' in all cases means STATION RADIO. The next letter A-E represents the power output, where A=0 to 10 watts; B=10 to 100 watts; C= 100 watts to 1kW; D= 1 to 10kW and E= In excess of 10kW. Finally, the figures represent a frequency range, where 10-39= 300kHz to 30MHz; 40-69= 30MHz to 3GHz and 70-99= Above 3 GHz. |
|